Uses & Tips

Our Molecular Cleaner works on everything, which comes in contact with water!

  • Recommended concentration is one packet (40 grams) of product per 24 – 32 oz of water.
  • Mix contents in warm/hot water and stir/shake until contents are dissolved.
  • Apply the treatment through a spray bottle, submersion, or directly on/in the desired application.
  • The warmer the water is, the better the solubility and effectiveness!
  • The longer the solution stays in contact with the minerals, the better!

Household Examples

Coffee Makers (Single Serve & Automatic Drip)

Single Serve Machines (i.e. Keurig)

  1. Mix packet contents with 24-32 oz of water, stir until dissolved.
  2. Pour into water reservoir.
  3. Do not put in cup or pod – but close handle or top.
  4. Place large mug on drip tray to catch solution.
  5. Run brew cycles until solution is used from reservoir.
  6. Run 2-3 tanks of water to flush clean.

Automatic Drip Machines

  1. Empty contents of 1 packet into coffee decanter filled to capacity with warm water. Mix thoroughly to dissolve ingredients.
  2. Pour entire contents of decanter into coffeemaker.
  3. Place empty decanter on hot plate.
  4. Turn unit “on” and let the coffeemaker empty completely into decanter.
  5. Turn coffeemaker “off”. Discard contents of decanter.
  6. Rinse decanter and brew funnel thoroughly with water and run a cycle of water through coffeemaker to rinse.


  1. Make sure dishwasher is empty of dishes.
  2. Pour contents of packet into detergent dispenser until ¾ full. Sprinkle any excess cleaner into the bottom of the dishwasher.
  3. Run dishwasher on hottest cycle (i.e. pots & pans or heavy wash).
  4. Depending on the level of rust, calcium, or other build up, more than one use may be necessary. 2 packets per cleaning is recommended for heavy buildup.

Washing Machine

  1. Make sure washing machine is empty (no clothes).
  2. Pour ½ of contents into detergent dispenser and ½ into the bottom of drum.
  3. Run washing machine on hottest cycle.

Sink (note: works great on/in stainless steel)

  1. Mix the contents at a ratio of 1 packet per 24-32 oz of warm water.
  2. Mix / shake thoroughly until the ingredients are dissolved.
  3. Spray or soak to remove mineral deposits and rust/iron stains.

Kettles / Pots / Water Heaters

  1. Mix the contents at a ratio of 1 packet per 24-32 oz of water.
  2. Boil the mixed solution until the deposits release or disappear.
  3. Rinse.

Toilet Tank (top shelf – proactive clean)

  1. Pour the contents of 1 packet into the toilet tank (upper deck).Note: It’s not necessary to stir.
  2. Do not flush for a minimum of 8 hours (the longer, the better).
  3. When flushing, hold down the handle for 5-10 seconds to allow the scaling to wash into bowl.
  4. Flush a second time to drain away the scaling now in the bowl (from the closet)
  5. If minerals remain on the walls, hold down the handle while wiping the walls.

Pet Bowls and Dishes

  1. Mix the contents of 1 packet with 24-32 oz of water.
  2. Mix / stir thoroughly to dissolve ingredients.
  3. Spray or soak to remove calcium and other mineral deposits.


  1. Mix the contents with a ratio of 1 packet per 24-32 ounces of water.
  2. Stir until contents are dissolved.
  3. Add the mixed solution to the humidifier’s water container.
  4. Turn the humidifier “on” and run for half to a full water cycle.
  5. Remove the water container and accessible parts – rinse fully.

Nuts & Bolts (Rust)

  1. Mix the contents with a ratio of 1 packet per 24-32 ounces of water.
  2. Stir/mix until contents are dissolved.
  3. Place and submerge the rusty metal (nuts, bolts, tools, etc.) in the solution.
  4. Soak in solution until desired results are achieved. NOTE: Can take up to 24 hours
  5. Remove from solution (rub with fingers to remove fine dust)